Support clients using CR+NUL to signal EOL
[mudpy.git] / mudpy / telnet.py
1 """Telnet functions and constants for the mudpy engine."""
2
3 # Copyright (c) 2004-2018 Jeremy Stanley <fungi@yuggoth.org>. Permission
4 # to use, copy, modify, and distribute this software is granted under
5 # terms provided in the LICENSE file distributed with this software.
6
7 import mudpy
8
9 # telnet options (from bsd's arpa/telnet.h since telnetlib's are ambiguous)
10 TELOPT_BINARY = 0  # transmit 8-bit data by the receiver (rfc 856)
11 TELOPT_ECHO = 1  # echo received data back to the sender (rfc 857)
12 TELOPT_SGA = 3  # suppress transmission of the go ahead character (rfc 858)
13 # TELOPT_TTYPE = 24 # exchange terminal type information (rfc 1091)
14 TELOPT_EOR = 25  # transmit end-of-record after transmitting data (rfc 885)
15 TELOPT_NAWS = 31  # negotiate about window size (rfc 1073)
16 TELOPT_LINEMODE = 34  # cooked line-by-line input mode (rfc 1184)
17
18 supported = (
19     TELOPT_BINARY,
20     TELOPT_ECHO,
21     TELOPT_SGA,
22     TELOPT_EOR,
23     TELOPT_NAWS,
24     TELOPT_LINEMODE
25 )
26
27 # telnet commands
28 EOR = 239  # end-of-record signal (rfc 885)
29 SE = 240  # end of subnegotiation parameters (rfc 854)
30 GA = 249  # go ahead signal (rfc 854)
31 SB = 250  # what follows is subnegotiation of the indicated option (rfc 854)
32 WILL = 251  # desire or confirmation of performing an option (rfc 854)
33 WONT = 252  # refusal or confirmation of performing an option (rfc 854)
34 DO = 253  # request or confirm performing an option (rfc 854)
35 DONT = 254  # demand or confirm no longer performing an option (rfc 854)
36 IAC = 255  # interpret as command escape character (rfc 854)
37
38 # RFC 1143 option negotiation states
39 NO = 0  # option is disabled
40 YES = 1  # option is enabled
41 WANTNO = 2  # demanded disabling option
42 WANTYES = 3  # requested enabling option
43 WANTNO_OPPOSITE = 4  # demanded disabling option but queued an enable after it
44 WANTYES_OPPOSITE = 5  # requested enabling option but queued a disable after it
45
46 # RFC 1143 option negotiation parties
47 HIM = 0
48 US = 1
49
50
51 def telnet_proto(*arguments):
52     """Return a concatenated series of Telnet protocol commands."""
53     return bytes((arguments))
54
55
56 def send_command(user, *command):
57     """Sends a Telnet command string to the specified user's socket."""
58     user.send(telnet_proto(IAC, *command), raw=True)
59
60
61 def is_enabled(user, telopt, party, state=YES):
62     """Indicates whether a specified Telnet option is enabled."""
63     if (telopt, party) in user.telopts and user.telopts[
64        (telopt, party)
65        ] is state:
66         return True
67     else:
68         return False
69
70
71 def enable(user, telopt, party):
72     """Negotiates enabling a Telnet option for the indicated user's socket."""
73     if party is HIM:
74         txpos = DO
75     else:
76         txpos = WILL
77     if not (telopt, party) in user.telopts or user.telopts[
78        (telopt, party)
79        ] is NO:
80         user.telopts[(telopt, party)] = WANTYES
81         send_command(user, txpos, telopt)
82     elif user.telopts[(telopt, party)] is WANTNO:
83         user.telopts[(telopt, party)] = WANTNO_OPPOSITE
84     elif user.telopts[(telopt, party)] is WANTYES_OPPOSITE:
85         user.telopts[(telopt, party)] = WANTYES
86
87
88 def disable(user, telopt, party):
89     """Negotiates disabling a Telnet option for the user's socket."""
90     if party is HIM:
91         txneg = DONT
92     else:
93         txneg = WONT
94     if not (telopt, party) in user.telopts:
95         user.telopts[(telopt, party)] = NO
96     elif user.telopts[(telopt, party)] is YES:
97         user.telopts[(telopt, party)] = WANTNO
98         send_command(user, txneg, telopt)
99     elif user.telopts[(telopt, party)] is WANTYES:
100         user.telopts[(telopt, party)] = WANTYES_OPPOSITE
101     elif user.telopts[(telopt, party)] is WANTNO_OPPOSITE:
102         user.telopts[(telopt, party)] = WANTNO
103
104
105 def negotiate_telnet_options(user):
106     """Reply to and remove telnet negotiation options from partial_input."""
107
108     # make a local copy to play with
109     text = user.partial_input
110
111     # start at the begining of the input
112     position = 0
113
114     # as long as we haven't checked it all
115     len_text = len(text)
116     while position < len_text:
117
118         # jump to the first IAC you find
119         position = text.find(telnet_proto(IAC), position)
120
121         # if there wasn't an IAC in the input or it's at the end, we're done
122         if position < 0 or position >= len_text - 1:
123             break
124
125         # the byte following the IAC is our command
126         command = text[position+1]
127
128         # replace a double (literal) IAC if there's a CR+NUL or CR+LF later
129         if command is IAC:
130             if (
131                     text.find(b"\r\0", position) > 0 or
132                     text.find(b"\r\n", position) > 0):
133                 position += 1
134                 text = text[:position] + text[position + 1:]
135             else:
136                 position += 2
137
138         # implement an RFC 1143 option negotiation queue here
139         elif len_text > position + 2 and WILL <= command <= DONT:
140             telopt = text[position+2]
141             if telopt in supported:
142                 if command <= WONT:
143                     party = HIM
144                     rxpos = WILL
145                     txpos = DO
146                     txneg = DONT
147                 else:
148                     party = US
149                     rxpos = DO
150                     txpos = WILL
151                     txneg = WONT
152                 if (telopt, party) not in user.telopts:
153                     user.telopts[(telopt, party)] = NO
154                 if command is rxpos:
155                     if user.telopts[(telopt, party)] is NO:
156                         user.telopts[(telopt, party)] = YES
157                         send_command(user, txpos, telopt)
158                     elif user.telopts[(telopt, party)] is WANTNO:
159                         user.telopts[(telopt, party)] = NO
160                     elif user.telopts[(telopt, party)] is WANTNO_OPPOSITE:
161                         user.telopts[(telopt, party)] = YES
162                     elif user.telopts[(telopt, party)] is WANTYES_OPPOSITE:
163                         user.telopts[(telopt, party)] = WANTNO
164                         send_command(user, txneg, telopt)
165                     else:
166                         user.telopts[(telopt, party)] = YES
167                 else:
168                     if user.telopts[(telopt, party)] is YES:
169                         user.telopts[(telopt, party)] = NO
170                         send_command(user, txneg, telopt)
171                     elif user.telopts[(telopt, party)] is WANTNO_OPPOSITE:
172                         user.telopts[(telopt, party)] = WANTYES
173                         send_command(user, txpos, telopt)
174                     else:
175                         user.telopts[(telopt, party)] = NO
176             elif command is WILL:
177                 send_command(user, DONT, telopt)
178             else:
179                 send_command(user, WONT, telopt)
180             text = text[:position] + text[position + 3:]
181
182         # subnegotiation options
183         elif len_text > position + 4 and command is SB:
184             telopt = text[position + 2]
185             if telopt is TELOPT_NAWS:
186                 user.columns = (
187                     text[position + 3] * 256 + text[position + 4])
188             end_subnegotiation = text.find(telnet_proto(IAC, SE), position)
189             if end_subnegotiation > 0:
190                 text = text[:position] + text[end_subnegotiation + 2:]
191             else:
192                 position += 1
193
194         # otherwise, strip out a two-byte IAC command
195         elif len_text > position + 2:
196             mudpy.misc.log("Unknown Telnet IAC command %s ignored." % command)
197             text = text[:position] + text[position + 2:]
198
199         # and this means we got the begining of an IAC
200         else:
201             position += 1
202
203     # replace the input with our cleaned-up text
204     user.partial_input = text